Honeywell HNVE1 Reference Guide - Page 53
Mimic Tours, Starting a Mimic Tour, Quick Program Preset Details
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
HNVE1 V2.1 1-Channel Encoder Reference Guide Mimic Tours In a mimic tour, the dome performs recorded pan, tilt, and zoom commands. You can configure 16 mimic tours of up to 120 seconds each. For details on configuring a mimic tour, see Configuring a Mimic Tour on page 66. Starting a Mimic Tour 1. Click the Live View tab. 2. Type in a number in the Mimic Tour Details field. 3. Click . The mimic tour starts and the dome performs the saved pan, tilt, and zoom commands. The tour loops and continues until you break the cycle. Stopping a Mimic Tour You can stop a preset tour by: • Using the PTZ Control • Selecting another function (for example, starting a Preset Tour) • Clicking Halt Deleting a Mimic Tours You can delete the pan, tilt, and zoom commands saved in a mimic tour. 1. Type in a number for a mimic tour in the Mimic Tour Details field on the PTZ Dome Setup tab. 2. Click Delete. A message displays indicating which mimic tour has been deleted. Quick Program Preset Details In the Quick Program Preset Details field, Guests and the Administrator can program presets 1-4 without using the PTZ Dome Setup tab (see page 62). Note Any existing saved preset positions are replaced with the new preset. Configuring new presets overrides/replaces existing saved presets (1-4). 1. Position the PTZ dome as required. 2. Type in a preset number (from 1-4) in the Quick Program Preset Details field. 3. Click Program. The new position is saved to the preset. Document 800-04195 Rev B 53 11/09