Honeywell HNVE1 Reference Guide - Page 54
IP and Firmware Settings, Alarm Settings,
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Before You Begin Configuring IP and Firmware Settings The IP and Firmware Settings panel on the Device settings tab mirrors the information that is available in the Honeywell IP Utility. It provides read-only network and firmware settings and video formats without having to access the IP Utility. Figure 4-7 IP and Firmware Settings on the Device Information Tab Device Name as entered in the IP Utility program IP Address on the network (DHCP/Static/APIPA) Subnet Mask and Default Gateway that connects the HNVE1 to the network MAC Address is a factory assigned address unique for each device Firmware Settings including product name and version Video Format (NTSC or PAL) Alarm Settings Figure 4-8 shows the alarm settings on the Device Settings tab. See Programming Alarm Contacts, page 59 for more detailed information. Figure 4-8 Alarm Settings on the Device Settings Tab Set the Alarm Input as Normally Open, Normally Close, or Disable Set the Alarm Output as Normally Open or Normally Close 54