Honeywell HNVE1 Reference Guide - Page 75
Upgrading the Firmware to the Device, Honeywell IP Firmware
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
HNVE1 V2.1 1-Channel Encoder Reference Guide 6. Type a case-sensitive New Password, and then re-type it in the Verify Password field. 7. Click Apply to change the password for the selected user. Upgrading the Firmware to the Device To upgrade the firmware to the device: 1. Navigate to www.honeywellvideo.com. 2. Click Customer Resources ➤ Download Center ➤ I Agree to reach the downloads page. 3. Locate your device in the list. 4. Under Honeywell IP Firmware, click the applicable link to download the firmware file to your computer. 5. Log onto the Honeywell IP Utility application. 6. Discover and connect to the device. 7. On the System tab, click Firmware Upgrade. Figure 6-1 Firmware Upgrade Note It is important to confirm that the selected firmware file is consistent with the connected device. For example, if you are connected to an HNVE1 encoder, confirm that the file selected begins with HNVE1_x.x.x.hex. 8. Follow the upgrade wizard steps to complete the upgrade. 9. In the Firmware Upgrade dialog box, enter the complete path and name of the *.hex file in the File Name field, or click Browse to select the file. 10. Click Upgrade. A progress bar shows the progress of the firmware upgrade, followed by a message confirming that the upgrade is complete. 11. Click OK to reboot the device. The firmware upgrade takes about three minutes and results in a temporary loss of connection with the device. Document 800-04195 Rev B 75 11/09