Honeywell HNVE1 Reference Guide - Page 65
Configuring a Preset Tour, HNVE1 V2.1 1-Channel Encoder Reference Guide, PTZ Dome Setup
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
HNVE1 V2.1 1-Channel Encoder Reference Guide 3. Use the keyboard to enter the required preset number, then press Enter. Preset Tours For a preset tour, the dome moves from one preset to another. At each preset, the dome stays for a predetermined time interval (the dwell time) before moving to another preset. You can configure up to 16 preset tours. In each preset tour, you can specify up to 64 presets. The length of time that a dome stays at a preset is referred to as the dwell time. The dwell time can range from 1 to 99 seconds. The speed at which the dome moves from one preset to another preset is referred to as the velocity. The velocity can range from 1o to 480o per second. Configuring a Preset Tour 1. Select the PTZ Dome Setup tab. 2. Under Preset Tour Details, type a number, then click Program. The Program Preset Tour OSD appears. Figure 5-5 Program Preset Tour OSD 3. Using the keyboard, type a number between 1 and 16 for the preset tour, then press Enter. 4. Type in a title for the preset tour, then press Enter. 5. Enter the values for the Preset, Velocity, and Dwell time for each required preset. 6. When all the presets have been included, press Enter to display the following options: Document 800-04195 Rev B 65 11/09