Honeywell HNVE1 Reference Guide - Page 52
Preset Tours, Starting a Preset Tour
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Before You Begin Configuring Preset Tours In a preset tour, the PTZ dome moves from one preset to another. The PTZ dome remains at each position for a specified amount of time (dwell time) before moving to the next preset position. You can configure up to 16 preset tours. Each preset tour can consist of up to 64 presets. For details on configuring a preset tour, see Configuring a Preset Tour on page 65. The time interval for which the PTZ dome stays at a preset is referred to as the dwell time. The dwell time can range from 1 to 99 seconds. The speed at which the PTZ camera moves from one preset to another preset is referred to as the velocity. The velocity can range from 1o to 480o per second, depending on the capability of the camera model. Note You can start a preset tour after configuring it. To start a preset tour, select the preset tour under Preset Tour Details and then click . Starting a Preset Tour 1. Click the Live View tab. 2. Click Run in the PTZ Settings pane. The Run Cont. Preset Tour options appear. 3. Type in the tour number in the field next to Run Cont. Preset Tour. If the tour number is less than 10, type 0 before the number. For example, for preset tour 9, type 09. 4. Click Enter. The preset tour starts and the PTZ camera moves to the first preset in the tour. The tour loops until you break the cycle. Stopping A Preset Tour You can stop a preset tour by: • Using the PTZ Control • Selecting another function (for example, start a Mimic Tour) • Clicking Halt 52