Honeywell HNVE1 Reference Guide - Page 60
Selecting the Camera Type, Alarm Outputs
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Encoder and Device Configuration Alarm Outputs Connect external devices such as sirens or flashing lights to the alarm output connector to signal users of the camera that an alarm is activated. Set the Alarm Output field as shown in Figure 5-1. See Connecting Alarms on page 21 for more information. Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply. Figure 5-1 Alarm Settings on Device Settings Tab Selecting the Camera Type To view video, you must select the type of camera to be connected to the encoder. The encoder can be connected to a PTZ dome or a fixed camera. 1. Select the Device Information tab. 2. In the Device Configuration area, select the camera type (Dome or Fixed) from the Camera Type drop-down list. 3. In the PTZ Id field, type the PTZ dome ID if you selected Dome in step 2. 4. Click Apply. 60