Honeywell HNVE1 Reference Guide - Page 67
Opening and Displaying the Camera Menu, Configuring Video Settings
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
HNVE1 V2.1 1-Channel Encoder Reference Guide Opening and Displaying the Camera Menu The camera menu enables you to configure the display, diagnostic, and other related camera settings. Note The Camera Menu is available only when IntelliBus™ or Diamond protocol is selected in the Board Setup tab. 1. Select the PTZ Dome Setup tab, then click Open Camera Menu. The on-screen menu for the camera options displays. Use the keyboard to select options listed in the camera menu. 2. Press ESC to close the menu. Configuring Video Settings The video signal sent to the Web-Client from the camera has a number of settings that can be edited which affect the video as it is displayed in the Web-Client. The Compression Settings view enables you to configure these settings: • Resolution • Frame Rate • Priority (Quality or Bite Rate) • Picture Quality (if Quality is chosen as the priority) • Target Bit Rate (if Bit Rate is chosen as the priority) • Maximum Bit Rate that the camera will provide across the network • GOP (number of frames) 1. On the Compression Settings tab, in the Statistics area, select the Received check box to receive the bit rate and frame rates for the current image in real time. Deselecting the check box disables the refresh rate. Note The Received check box is disabled by default. When you log off, this check box reverts to the disabled state. Document 800-04195 Rev B 67 11/09