IBM 8479 Hardware Maintenance Manual - Page 103
error, messages
UPC - 087944653912
View all IBM 8479 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Setup Action Setup and Installation CD won't start. v Be sure the server is supported; all eServers with a startable (bootable) CD-ROM drive are supported. v If the startup (boot) sequence settings have been altered, be sure the CD-ROM is first in the boot sequence. v If more than one CD-ROM drive is installed, be sure that only one drive is set as the primary drive. Start the CD from the primary drive. ServeRAID program cannot v Be sure there are no duplicate SCSI IDs or IRQ assignments. view all installed drives - or v Be sure that the hard disk drive is connected properly. - cannot install NOS. The Operating System Installation program continuously loops. Free up more space on the hard disk. ServerGuide won't start your Be sure the NOS CD you have is supported by ServerGuide. See theSetup and NOS CD. Installation CD label for a list of NOS versions supported. Can't install NOS - option is Either there is no logical drive defined (ServeRAID systems) or the ServerGuide grayed out. system partition is not present. Run the setup and configuration program. TechConnect CD Action Can't start TechConnect CD. Be sure you're starting the CD on a system with Microsoft Windows installed. Can't view publications from TechConnect CD, or text is unreadable. Be sure you have the Adobe reader installed (available from the TechConnect CD). System Updates and Applications CD Action Get ″time out″ or ″Unknown Be sure you have access to the Internet through FTP directly. host″ errors POST error messages In the following error codes, X can be any number or letter. Error Symptom FRU/Action BIOS ROM checksum error -- system halted (BIOS code checksum in BIOS chip incorrect; BIOS may be corrupt) 1. Replace BIOS CMOS battery failed (CMOS 1. Battery battery not functional) CMOS checksum error -defaults loaded (CMOS checksum incorrect, system loads default equipment configuration) 1. Run Configuration/Setup 2. Battery CPU at nnnn (displays running speed of CPU) 1. Informational only; no action necessary. Press ESC to skip memory 1. Full memory test may be skipped by pressing Esc key test Symptom-to-FRU index 95