IBM 8479 Hardware Maintenance Manual - Page 88
CD-ROM, drive
UPC - 087944653912
View all IBM 8479 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
To remove the system board, do the following: 1. Power-off the server, if it is on. 2. Unplug the server. 3. Remove the cover (see "Side cover removal" on page 42). 4. Remove the front bezel (see "Bezel removal" on page 43). 5. Remove the support bracket (see "Removing the support bracket assembly" on page 45). 6. Disconnect the cables. 7. Remove the adapter cards and both adapter retaining brackets (see "Adapter installation" on page 47). 8. Remove the hard disk drive cage (see "Hard disk drive cage" on page 77). 9. Remove memory modules (see "Memory modules" on page 54). 10. Remove microprocessors and/or terminator cards (see "Microprocessor" on page 56). 11. Remove screws and lift the system board out of the server. CD-ROM drive Before you begin: v Read "Safety information" on page 103. v Review the information in "Before you begin" on page 40. 80 xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual