IBM 8479 Hardware Maintenance Manual - Page 74
Mouse, connector, Keyboard
UPC - 087944653912
View all IBM 8479 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Mouse connector The system board has one mouse connector that supports a mouse or other pointing device. The mouse connector is located on the rear of the server. See "I/O connector locations" on page 64 for its location. The following table shows the pin-number assignments for the mouse connector. 6 4 2 5 3 1 Table 7. Mouse connector pin-number assignments Pin Signal 1 Data 2 Not connected 3 Ground 4 +5 V dc 5 Clock 6 Not connected Keyboard connector There is one keyboard connector on the rear of the server. See "I/O connector locations" on page 64 for its location. Note: If you attach a standard (non-USB) keyboard to the keyboard connector, the USB connectors and devices will be disabled during the power-on self-test. The following table shows the pin-number assignments for the keyboard connector. 6 4 2 5 3 1 Table 8. Keyboard connector pin-number assignments Pin I/O Signal 1 I/O Data 2 N/A Reserved 3 N/A Ground 4 N/A +5 V dc 5 I/O Keyboard clock 6 N/A Reserved 66 xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual