IBM 8479 Hardware Maintenance Manual - Page 49
Stabilizing
UPC - 087944653912
View all IBM 8479 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
v Cables for optional adapters are routed according to the instructions that are provided with the adapters. v A failed fan is replaced within 1 hour. Stabilizing feet The four feet on the bottom of the server provide additional stability when the feet are placed in the stabilizing position. Complete the following steps to place the feet in the stabilizing position. 1. Place the server on its side. 2. Locate the release tab inside the foot; then, lift up on the tab. Note: The following illustration shows the rear feet located on the bottom rear of the server. Release tab Feet (unlocked position) Release tab 3. Rotate the foot inward to the unlocked position; then, remove the foot from the server. 4. Align the post in the center of the foot with the hole on the bottom of the server and place the foot between the guides as indicated. Note: The following illustration shows the rear feet located on the bottom rear of the server. Installing options 41