IBM 8479 Hardware Maintenance Manual - Page 55
Adapter, installation
UPC - 087944653912
View all IBM 8479 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
changed the default boot sequence: PCI expansion slots 1 through 5; then the system board integrated drive electronics (IDE) or SCSI devices. Note: To change the startup sequence for PCI devices, start the Configuration/Setup Utility program, select Start Options from the main menu, select Startup Sequence; then, select Second device (SCSI) to designate the adapter boot sequence. See "Configuration" on page 25 for details on using the Configuration/Setup Utility program. v For a list of supported options for the server, refer to http://www.ibm.com/pc/ compat on the World Wide Web. Adapter installation Expansion slot cover Adapter retaining bracket Adapter Adapter support bracket Complete the following steps to install an adapter: Attention: When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For details on handling these devices, see "Handling electrostatic discharge-sensitive devices" on page 106. 1. Review the information in "Before you begin" on page 40. 2. Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the side cover. See "Side cover removal" on page 42 for details. 3. Determine which PCI expansion slot you will use for the adapter. Note: If you are installing or replacing an adapter that will control your startup (boot) drive, install the adapter in PCI expansion slot 2. 4. If you are installing a full-length adapter, rotate the front adapter support bracket to the open (unlocked) position. Installing options 47