IBM 8479 Hardware Maintenance Manual - Page 42
Setup, configuration, overview
UPC - 087944653912
View all IBM 8479 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setup and configuration overview When you use the Setup and Installation CD, you do not need setup diskettes. You can use the CD to configure any supported IBM server model. The setup program checks the system BIOS, service processors, and other system hardware to determine if system updates are available. The setup program provides a list of tasks that are required to set up the server model. On RAID servers, you can run the ServeRAID Manager program to create logical drives. Note: Exact features and functions can vary with different versions of the ServerGuide software. When you start the Setup and Installation CD, the following happens: v You are prompted for your language, country, and keyboard layout. (This information is stored and later passed on to the NOS installation program.) v The ServerGuide program displays choices for running the configuration programs. For example: - The Express Configuration method runs the required programs for the server, based on the hardware that is detected. - The Custom Configuration method displays all programs that are available for the server, and you decide which programs to run. - The Replicated Configuration method provides the option of duplicating the setup selections to other servers that are the same model. v If you select the Custom Configuration method, the following programs are optional. If you select the Express Configuration method, some or all of these programs are run, depending on the hardware that is detected. - The Set Date and Time feature is provided so that you do not have to use the Configuration/Setup Utility program to access these settings. - The Clear Hard Disks program is provided so you can delete all partitions on all hard disk drives. If the server has a ServeRAID adapter installed, you can select to restore the configuration on the ServeRAID adapter to the factory default settings. - The ServerGuide program checks the server BIOS code and microcode (firmware) levels for supported options and then checks the CD for a newer level. CD content can be newer than the hardware. The ServerGuide program can perform a flash update of the BIOS code and supported microcode (firmware) options without the use of diskettes. - The ServeRAID program starts, leading you through the entire configuration process. - The Performance Optimizer program easily tunes the server for the environment. - The ServerGuide program creates a System Partition on the default drive. v The ServerGuide program displays a confirmation summary, so that you will know when you have completed all the required tasks. Then, you are ready to install the NOS. Notes: 1. Plug and Play adapters are configured automatically. Non-Plug and Play adapters or non-IBM adapters might require switch settings, additional device drivers, and installation after the NOS is installed. See the documentation that comes with the adapter. 2. Diagnostics for the server come in BIOS code or on a separate diagnostics CD. 34 xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual