IBM 887022X Installation Guide - Page 35
Reinstalling, Expansion, Module, cover
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reinstalling an SMP Expansion Module and cover After installing options in the SMP Expansion Module, you will need to reinstall the SMP Expansion Module cover and reinstall the SMP Expansion Module in the server. Complete the following steps to reinstall the SMP Expansion Module cover: 1. Install the cover on the SMP Expansion Module: a. Set the cover on top of the expansion module. b. Extend the locking levers as shown in the illustration; then, let the cam on the front of the cover fall into the cam opening on the SMP Expansion Module circuit board. Locking levers CAM opening Figure 19. Installing the SMP Expansion Module cover c. Release the locking levers and align the rear of the cover with the rear edge of the circuit board. d. Press down on the cover until it snaps into place. Chapter 2. Installing options 23