IBM 887022X Installation Guide - Page 82
descriptions, ServerGuide, startup, problems
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
POST beep code descriptions POST emits one beep to signal successful completion. If POST detects a problem during startup, other beep codes might occur. Use the following beep code descriptions to help identify and solve problems that are detected during startup. Note: See the Hardware Maintenance Manual and Troubleshooting Guide on the IBM xSeries Documentation CD for more information about the POST beep codes. One beep POST was completed successfully. Repeating long beeps A memory error has occurred. Make sure that all DIMMs are correctly installed. One long beep and two short beeps A video error has occurred, and the BIOS cannot initialize the monitor screen to display additional information. ServerGuide startup problems Look for the symptom in the left column of the chart. Probable solutions to the problem are in the right column. Note: If your server model came with an operating system, such as Microsoft Windows 2000 Datacenter Server or VMware ESX server, see the software documentation provided with your software for configuration information. Symptom Suggested action Setup and Installation CD will not start. v Ensure that the system is a supported server with a startable (bootable) DVD-ROM drive. v If the startup (boot) sequence settings have been altered, be sure the DVD-ROM is first in the boot sequence. ServeRAID program If you installed an optional ServeRAID adapter: cannot view all installed v Ensure that there are no duplicate SCSI IDs or IRQ assignments. drives - or - cannot install v Ensure that the hard disk drive is connected properly. NOS. The Operating System Installation program continuously loops. Free up more space on the hard disk drive. ServerGuide will not start Ensure that the NOS CD you have is supported by ServerGuide. See the Setup and your NOS CD. Installation CD label for a list of NOS versions supported. Cannot install NOS option is grayed out. Either there is no logical drive defined (ServeRAID systems) or the ServerGuide system partition is not present. Run the ServerGuide setup and configuration program and ensure that setup is complete 70 xSeries 445 Type 8870: Installation Guide