IBM 887022X Installation Guide - Page 90
Light, diagnostics, table
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Light path diagnostics table Use the following table to help determine the cause of the error and the action you should take. Lit LED on diagnostics panel None Cause An error has occurred and cannot be isolated, or the error log is full. CPU One of the microprocessors has failed. Action An error has occurred that is not represented by a light path diagnostics LED. Check the system error log for more information about the error. v Check the microprocessor failure LEDs on the system board. v If a microprocessor failure LED is on, make sure the microprocessor is installed correctly. (See the Option Installation Guide on the IBM xSeries Documentation CD for installation instructions.) MEMORY A memory error occurred. If the problem remains, call for service. v Check the DIMM failure LEDs on the system board. v Replace the DIMM indicated by the lit DIMM failure LED. DASD One of the hot-swap hard drives has failed If the problem remains, call for service. v Make sure the hard drive is installed correctly. Remove and re-install, if necessary. v Check to see that the server fans are operating correctly. PCI-X BUS An error occurred on a PCI bus. If the problem remains, call for service. v Check the system error log. v If you cannot isolate the failing adapter from the information in the system error log, try to determine the failing adapter by removing one adapter at a time from the failing PCI-X bus and restarting the server after each adapter is removed. FAN TEMP A fan has failed or is operating too slowly. Note: A failing fan can also cause the TEMP LED to be lit. The system temperature has exceeded a threshold level. If the problem remains, call for service. Check the LEDs on the fans and replace the indicated fan. If the problem remains, call for service. v Check to see if a fan has failed. If it has, replace the fan. v Make sure the room temperature is not too hot. (See "Features and specifications" on page 4 for temperature information.) If the problem remains, call for service. 78 xSeries 445 Type 8870: Installation Guide