Icom IC-7100 Instruction Manual - Page 24
Vfo/memory Selection Key [v/m], Transmit Frequency Check Key [xfc] - antenna tuner
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1 PANEL DESCRIPTION Microphone DDHM-151 (Option) (Continued) SPCH /LOCK TUNER /CALL XFC V/M MW F-1 F-2 1.8 1 3.5 2 7 3 MODE 10 14 18 4 5 6 FIL 21 7 24 8 28 9 GENE . 50 144 430 F-INP 0 CE ENT !3 !2 !1 !0 o i Mic element u u MODE KEY [MODE] ➥➥Push to cycle through the operating modes: USB/LSB ➧ CW/CW-R ➧ RTTY/RTTY-R ➧ AM ➧ FM ➧ WFM ➧ DV ➥➥Hold down for 1 second to toggle the following operating modes: USB ↔ LSB CW ↔ CW-R RTTY ↔ RTTY-R i POWER LED Lights green when transceiver's power is ON. o PROGRAMMABLE FUNCTION KEYS [F-1]/[F-2] Program and perform a selected function. • The functions can be assigned in the "RC MIC" item of the "Function" Set mode (p. 6-6). The default settings for [F-1] and [F-2] are "MPW" and "MPR." SET > Function > RC MIC !0 MEMORY WRITE KEY [MW] (AI sec. 11) Hold down for 1 second to store VFO data into the selected memory channel. • This can be done in both the VFO and memory modes. !1 VFO/MEMORY SELECTION KEY [V/M] ➥➥Push to switch between the VFO and memory modes. (p. 3-4) ➥➥Hold down for 1 second to copy the memory contents to the displayed VFO. (AI sec. 11) !2 T RANSMIT FREQUENCY CHECK KEY [XFC] ➥ During split frequency or repeater operation, hold down to listen to the transmit frequency. (AI sec. 4) • While holding down this switch, the transmit frequency can be changed with the Dial or MPAD . • When the Split Lock function is turned ON in the Split operation, hold down [XFC] to cancel the Dial lock function. (AI sec. 6) ➥ When operating simplex, hold down to monitor the frequency. • While holding down this key, the squelch is open and the interference reject function is temporarily turned OFF. ➥ When operating simplex and the RIT function is turned ON, hold down to listen to the transmit frequency. The frequency is the same as when the RIT is OFF. (AI sec. 5) ➥ In the DV mode, hold down this key to select the RX monitoring mode. (p. 6-3) !3 TUNER/CALL KEY [TUNER/CALL] ❍ ANTENNA TUNER KEY Operation (AI sec. 16) (Frequency band: HF, 50/70* MHz) ➥ Push to turn an optional antenna tuner ON or OFF (bypass). ➥ Hold down for 1 second to manually start the antenna tuner. • If the tuner cannot tune the antenna within 20 sec- onds, the tuning circuit is automatically bypassed. * 70 MHz band transmission is available, depending on the transceiver version. ❍ CALL KEY Operation (AI sec. 11) (Frequency band: 144/430 MHz) Push to select the Call channel. 1-20