Icom IC-9700 Instruction Manual basic - Page 23
Setting the frequency
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 BASIC OPERATION Setting the frequency DDUsing the Main Dial 1. Select the desired operating band. (p. 3-3) (Example: 145 MHz) 2. Rotate MAIN DIAL . ••The frequency changes according to the selected Tuning Step. L is displayed when you set an amateur radio frequency, and (with dotted line) is displayed when you set a frequency outside the Ham band, or outside your set Band Edges. DDAbout the Tuning Step function You can set the MAIN DIAL 's tuning step for each operating mode. Touch the kHz digits to turn the Tuning Step function ON or OFF. L The Tuning Step function's icon "▼" is displayed above the 1 kHz digit. The Tuning Step function is ON. DDChanging the Tuning Step When the Tuning Step function is ON, you can change the tuning steps for each operating mode. 1. Select the desired operating mode. (p. 3-3) (Example: FM) 2. Touch the kHz digit for 1 second. ••The TS (FM) screen is displayed. 3. Touch the desired tuning step. (Example: 0.1 k) DDAbout the 1 MHz Step Tuning function You can use the maximum tuning step of 1 MHz. 1 Touch the MHz digits for 1 second to turn the MHz 2 Step Tuning function ON or OFF. LWhen using the [UP]/[DN] keys on the microphone, 3 the frequency changes in 1 MHz steps. 4 5 6 7 The MHz Step function is ON. 8 9 DDAbout the 1 Hz step Fine Tuning 10 function You can use the minimum tuning step of 1 Hz for fine 11 tuning in the SSB, CW and RTTY modes. 12 Touch the Hz digits for 1 second to turn the Fine Tuning function ON or OFF. 13 14 15 16 17 18 The 1 Hz digit is displayed. 19 20 21 LWhen using the [UP]/[DN] keys on the microphone, the frequency changes in 50 Hz steps with the Fine Tuning function ON or OFF. ••The tuning step is set and returns to the previous screen. 3-4