Icom IC-9700 Instruction Manual basic - Page 91

13 CONNECTOR INFORMATION [KEY] [USB] Connects to a Paddle key or Straight key. LYou can select the key type. MENU » SET > KEYER > EDIT/SET > CW-KEY SET > Key Type ••Paddle key dot com dash 3.5 (d) mm (⅛ in) ••Straight key _ + 3.5 (d) mm (⅛ in) USB (1.1/2.0) type B 1 ••Outputting the decoded RTTY data. ••Outputting the demodulated AF signal or 12 kHz IF 2 signal. ••Inputting the modulation AF signal. 3 ••Interface for remote control by CI-V commands. ••Cloning the setting data using the CS-9700 software. 4 ••Remotely controlling using optional RS-BA1. LYou can change the signal output type and output level. 5 MENU » SET > Connectors > USB AF/IF Output 6 LYou can download the USB driver and installation guide from the Icom website. 7 http://www.icom.co.jp/world/support/download/firm/ 8 [LAN] 9 [EXT-SP MAIN] / [EXT-SP SUB] Connects to external speakers. AF 3.5 mm, ⅛ in (d) ••Output impedance: 4 ~ 8 Ω (3.5 mm, ⅛ in (d)) GND ••Output level: More than 2 W at 10% distortion into an 8 Ω load. Audio output settings (When [PHONES] is not in use) Internal EXT-SP MAIN EXT-SP SUB speaker Internal MAIN/SUB speaker OFF OFF External speaker (MAIN+SUB) OFF MAIN* SUB* External speaker (MAIN) SUB MAIN* OFF External speaker (SUB) MAIN OFF SUB* * When the [External Speaker Separate] item is set to "Mix," the audio from both MAIN and SUB are output, and the internal speaker is deactivated. MENU » SET > Connectors > External Speaker Separate LL Informatio ••The internal speaker is deactivated while an external speaker is connected. ••[EXT-SP A] is for the Main band and [EXT-SP B] is for the Sub band. MENU » SET > Connectors > EXT-SP MAIN/SUB Mix ••Time synchronization by an NTP server. ••Outputting the demodulated AF signal or 10 12 kHz IF signal. ••Remotely controlling using optional RS- w q 11 BA1. ••Gateway communication (D-STAR) 12 ••Data communication (DD mode) LYou can select the output signal from AF and IF 13 signals. MENU » SET > Connectors > LAN AF/IF Output 14 About the LED indication q LINK/ACT 15 ••Lights when a cable is connected. ••Does not light when a cable is not connected. 16 ••Blinks while communicating. w Speed 17 ••Lights while communicating in 100BASE-TX. ••Does not light while communicating. 18 ••Blinks while communicating in 10BASE-T, or not connected. 19 20 [DATA] 21 Connects a PC through a data GND TxD communication cable (user supplied), for data communication, DV Gateway functions or remote controlling by 2.5 (d) mm RxD CI-V commands. Using the optional communication cable, you can use the RS-MS1A application. Connecting a GPS unit (NMEA compatible) or GPS output compatible Icom transceiver (Example: ID- 31PLUS) enables the received position data to be displayed on the IC-9700's display. 13-2