Icom IC-9700 Instruction Manual basic - Page 78

Cloning

Get Icom IC-9700 PDF manuals and user guides View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

10 MAINTENANCE Cloning The IC-9700 has a data cloning capability. This function is useful when you want to copy all of the entered contents from one IC-9700 to another. This section describes the cloning method using an SD card. LRecorded voice memories are not included in the cloning data. To play back the master transceiver's voice memory, insert the SD card into a sub transceiver, or make a copy onto the sub transceiver's SD card using a PC. LAssumes that the SD card has already been inserted into the transceiver. Step 1. S aving the master transceiver's setting data onto the SD card. 1. Open the SAVE SETTING screen. MENU » SET > SD Card > Save Setting 2. Touch "." Step 2. Remove the SD card from the master transceiver, then insert it into the sub transceiver. 1. Turn OFF the master transceiver. 2. Remove the SD card from the master transceiver. 3. Insert the SD card into the sub transceiver, then turn ON the sub transceiver. NOTE: ••Turn OFF the transceiver before you attach or detach the SD card. ••DO NOT turn OFF the transceiver while saving or loading the setting data. Otherwise the data may be corrupted or deleted. LThe file name is automatically set in the following format: Setyyyymmdd_xx (yyyy: Year, mm: month, dd: day, xx: serial number). 3. To save the file with the displayed name, touch [ENT]. Master Sub TIP: The setting data are saved in the "icf" file format that is used in the CS-9700 programming software. When the saved data on a card is copied to a PC, you can edit it with the programming software. For details, refer to the CS-9700 instructions that can be downloaded from the Icom website. (Continue the steps on the next page.) LIf you want to change the name, delete the name and reenter it, and then touch [ENT]. 4. Touch [YES]. ••Saves the data settings. 5. To close the SD CARD screen, push EXIT several times. 10-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
10
MAINTENANCE
10-3
Cloning
The IC-9700 has a data cloning capability. This
function is useful when you want to copy all of the
entered contents from one IC-9700 to another.
This section describes the cloning method using an
SD card.
L
Recorded voice memories are not included in the cloning
data. To play back the master transceiver’s voice memory,
insert the SD card into a sub transceiver, or make a copy
onto the sub transceiver’s SD card using a PC.
L
Assumes that the SD card has already been inserted into
the transceiver.
Step 1� Saving the master transceiver’s setting
data onto the SD card�
1.
Open the SAVE SETTING screen.
MENU
»
SET > SD Card >
Save Setting
2.
Touch “<<New File>>.”
Step 2� Remove the SD card from the master
transceiver, then insert it into the sub
transceiver�
1.
Turn OFF the master transceiver.
2.
Remove the SD card from the master transceiver.
3.
Insert the SD card into the sub transceiver, then
turn ON the sub transceiver.
L
The file name is automatically set in the following
format: Setyyyymmdd_xx (yyyy: Year, mm: month,
dd: day, xx: serial number).
3.
To save the file with the displayed name, touch
[ENT].
L
If you want to change the name, delete the name and
reenter it, and then touch [ENT].
4.
Touch [YES].
• Saves the data settings.
5.
To close the SD CARD screen, push
EXIT
several
times.
Master
Sub
NOTE:
• Turn OFF the transceiver before you attach or
detach the SD card.
•
DO NOT
turn OFF the transceiver while saving or
loading the setting data. Otherwise the data may be
corrupted or deleted.
TIP:
The setting data are saved in the “icf” file
format that is used in the CS-9700
PROGRAMMING
SOFTWARE
.
When the saved data on a card is copied to a PC,
you can edit it with the programming software.
For details, refer to the CS-9700 instructions that
can be downloaded from the Icom website.
(Continue the steps on the next page.)