Icom IC-9700 Instruction Manual basic - Page 47
Unmounting, Saving the setting data
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
SD CARD 6 Unmounting Before you remove a card when the transceiver is ON, be sure to electrically unmount it, as shown below. Otherwise the data may be corrupted or deleted. 1. Open the SD CARD screen. MENU » SET > SD Card 2. Touch "Unmount." 3. Touch [YES] to unmount. ••After unmounting, returns to the SD CARD screen. LTo cancel unmounting, touch [NO]. 4. Remove the card from the transceiver. q Push in w Pull out LPush in the SD card until a click sounds to unlock the card, and then pull it out. 5. To close the SD CARD screen, push EXIT several times. When the transceiver is OFF You can remove the SD card starting from step 4 of the steps described above. Saving the setting data The Memory channels and the transceiver's settings can be saved onto an SD card. 1 1. Open the SAVE SETTING screen. 2 MENU » SET > SD Card > Save Setting 3 2. Touch "." 4 5 6 7 LThe file name is automatically set in the following format: Setyyyymmdd_xx (yyyy: Year, mm: month, dd: day, xx: serial number). 3. To save the file with the displayed name, touch [ENT]. 8 9 10 11 12 13 LIf you want to change the name, delete the name and reenter it, and then touch [ENT]. 4. Touch [YES]. ••Saves the data settings. 14 15 16 17 18 19 5. To close the SD CARD screen, push EXIT several times. 20 21 6-2