Icom IC-9700 Instruction Manual basic - Page 84

Problem, Possible Cause, Solution

Get Icom IC-9700 PDF manuals and user guides View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

10 MAINTENANCE Troubleshooting (Continued) PROBLEM A Local area call can be made, but the Gateway call or destination station call cannot be made. "L" is displayed on the LCD. "DV" and "FM" icons alternately blink. POSSIBLE CAUSE MY call sign has not been registered on a D-STAR repeater. The repeater set in "FROM" (Access Repeater) has no Gateway. While receiving through the internet, some packets may be lost due to network error (poor data throughput performance). While in the DV mode, an FM signal is received. SOLUTION Register your own call sign (MY) on a gateway repeater, or confirm the registration of the call sign. Check the repeater settings. Wait a while, and try it again. LW hen the transceiver receives corrupted data, and misidentifies it is as Packet Loss, "L" is displayed, even if it is a Local area call. Use a different operating frequency until there are no FM signals on the original frequency. REF. 10-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
10
MAINTENANCE
10-9
Troubleshooting (Continued)
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF�
A Local area call can be
made, but the Gateway
call or destination station
call cannot be made.
MY call sign has not been registered on
a D-STAR repeater.
Register your own call sign (MY) on
a gateway repeater, or confirm the
registration of the call sign.
The repeater set in “FROM” (Access
Repeater) has no Gateway.
Check the repeater settings.
“L” is displayed on the
LCD.
While receiving through the internet,
some packets may be lost due to
network error (poor data throughput
performance).
Wait a while, and try it again.
L
When the transceiver receives
corrupted data, and misidentifies it is
as Packet Loss, “L” is displayed, even
if it is a Local area call.
“DV” and “FM” icons
alternately blink.
While in the DV mode, an FM signal is
received.
Use a different operating frequency until
there are no FM signals on the original
frequency.