Icom IC-9700 Instruction Manual basic - Page 24
About the 1/4 Tuning function, Directly entering a frequency, About the Auto Tuning Step function
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 BASIC OPERATION Setting the frequency (Continued) DDAbout the 1/4 Tuning function Mode: SSB-D/CW/RTTY With the Tuning Function OFF, turn ON the 1⁄4 Tuning function to reduce the tuning speed to 1⁄4 of the normal speed, for finer tuning. 1. Push FUNCTION . ••Opens the FUNCTION screen. 2. Touch [1/4]. DDDirectly entering a frequency You can set the frequency without rotating MAIN DIAL by directly entering it on the keypad. Entering the operating frequency 1. Touch the MHz digits. (Example: 146) ••Opens the BAND STACKING REGISTER screen. 2. Touch [F-INP]. FUNCTION screen 3. Push EXIT . 1/4 Tuning function ••Opens the F-INP screen. 3. Start entry with the most significant digit. DDAbout the Auto Tuning Step function The tuning step automatically changes, depending on the rotating speed of MAIN DIAL . LYou can change the Auto Tuning Step function settings in the following menu. (p. 8-4) MENU » SET > Function > MAIN DIAL Auto TS LTo clear the entry, touch [CE]. LTo clear the entry and return to the previous screen, push EXIT . 4. Touch [ENT] to set the entered frequency. ••Closes the F-INP screen. LIf you touch [ENT] when the digits under 100 kHz are not entered, "0" will be automatically entered into the digits that are blank. Entry examples ••144.680 MHz: [1], [4], [4 6], [8], [0], [ENT] ••145.000 MHz: [1], [4], [5], [ENT] ••Changing from 144.680 MHz to 144.540 MHz: 5], [4], [0], [ENT] 3-5