Icom IC-9700 Instruction Manual basic - Page 89
Mounting the MB-118, Attaching the MB-123
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
OPTIONS 12 Mounting the MB-118 Mount the MB-118 mounting bracket to a place where it can be firmly attached. L We recommend that you periodically check whether the screws are loose or not, especially after a long period of use. NOTE: 1 ••Before mounting the MB-118, carefully read PRECAUTIONS (p. vii) and decide the mounting place. 2 ••DO NOT use bolts other than the ones that are supplied with the MB-118. Other bolts (longer than 3 8 mm/0.31 in) may damage the internal units. 4 5 Bolt 6 7 Screw Spring washer Flat washer Adjust for the best 8 viewing angle. 9 10 11 12 MB-118 Drill 4 holes of 3 mm (0.12 in) for the bracket location. L Drill 5.5 mm~5.6 mm (0.21 in~0.22 in) holes when using 13 the supplied hex screws. 14 15 Attaching the MB-123 16 The optional MB-123 carrying handle with the rubber feet is convenient for carrying the transceiver. 1. Attach the rubber feet supplied with the MB-123 to the transceiver. LTo firmly attach, push-in the center part of the rubber feet. 2. Attach the carrying handle using the supplied screws, as shown to the right. NOTE: DO NOT use other than the screws supplied with the MB-123. 17 18 Rubber feet Push-in the 19 center part 20 21 Carrying handle Rubber feet 12-2