Icom IC-9700 Instruction Manual basic - Page 40
Split Lock function, Setting the, Operating CW
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4 RECEIVING AND TRANSMITTING Split Lock function To prevent accidentally changing the receive frequency by releasing XFC while rotating MAIN DIAL , use the Split Lock function. Using both this function and the Dial Lock function enables you to change only the transmit frequency. 1. Turn ON the Split Lock function. MENU » SET > Function > SPLIT > SPLIT LOCK 2. Turn ON the Split function. 3. Hold down SPEECH for 1 second to turn ON the Dial Lock function. 4. While holding down XFC , set the transmit frequency. Operating CW DDSetting the CW pitch control You can set the received CW audio pitch and the CW side tone to suit your preference without changing the operating frequency. 1. Select the CW mode. 2. Display the Multi-function menu. Push 3. Touch [CW PITCH]. Setting the transmit filter width SSB mode The transmit filter width for the SSB and SSB-D modes can be set. Only for the SSB mode, WIDE (wide), MID (middle) or NAR (narrow) can be selected. To change the filter width in the SSB mode: 1. Set the operating mode to USB or LSB. 2. Push FUNCTION . ••Opens the FUNCTION screen. 3. Touch [TBW]. LTouching [TBW] sets the filter width to WIDE, MID or NAR. 4. Set the CW pitch to between 300 and 900 Hz (in 5 Hz steps). 5. Push MULTI to close the Multi-function menu. DDSetting the key speed You can set the keying speed of the internal electric keyer. 1. Select the CW mode. 2. Display the Multi-function menu. Push 3. Touch [KEY SPEED]. The transmit filter widths are set to the following values by default. ••SSB (WIDE): 100 Hz to 2900 Hz ••SSB (MID): 300 Hz to 2700 Hz ••SSB (NAR): 500 Hz to 2500 Hz ••SSB-D: 300 Hz to 2700 Hz LYou can change the filter width values in the following settings. MENU » SET > Tone Control/TBW > TX > SSB > TBW (WIDE) MENU » SET > Tone Control/TBW > TX > SSB > TBW (MID) MENU » SET > Tone Control/TBW > TX > SSB > TBW (NAR) MENU » SET > Tone Control/TBW > TX > SSB-D > TBW 4. Set the key speed to between 6 and 48 Words Per Minute (WPM). 5. Push MULTI to close the Multi-function menu. 4-10