Icom IC-9700 Instruction Manual basic - Page 26
Entering a Band Edge
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3 BASIC OPERATION Setting the frequency (Continued) DDEntering a Band Edge When "ON (User)" or "ON (User) & TX Limit" is selected on the "Band Edge Beep" screen, you can enter a total of 30 band edge frequency pairs. LInitially, all Ham band frequencies are entered into the first 3 band edges. Therefore, you must first edit or delete them to enter a new band edge. LYou cannot enter an overlapping frequency, or a frequency that is out of the preset Ham band frequencies. LBand edges are entered from the lower frequency first. 1. Open the "Band Edge Beep" screen. MENU » SET > Function > Band Edge Beep 2. Select "ON (User)" or "ON (User) & TX Limit." LIf you select "ON (User) & TX Limit," you can limit transmission to within the entered frequency range. Rotate Push 3. Select "User Band Edge." Rotate Push 3. Edit the lower band edge frequency, then touch [ENT]. (Example: 430.1) Entry example: [•], [1], [ENT] 4. Edit the upper band edge frequency, then touch [ENT]. (Example: 439.1) Entry example: [4] [3] [9] [•], [9], [ENT] ••The edited band edge is saved and returns to the previous screen. TIP: You can also edit the frequency by rotating MAIN DIAL or MULTI . ••Opens the "User Band Edge" screen. Editing a Band Edge You can edit a band edge entered as a default or when entering a new band edge. 1. On the FUNCTION set screen, select "User Band Edge." 2. Touch the band edge you want to edit for 1 second. (Example: 2: 430.000.000 - 440.000.000 MHz) Rotate Push 3-7