Icom IC-9700 Instruction Manual basic - Page 76
Maintenance
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
10 MAINTENANCE Cleaning DO NOT use harsh solvents such as benzine or alcohol when cleaning, because they will damage the transceiver surfaces. If the transceiver becomes dusty or dirty, wipe it clean with a dry, soft cloth. 1. Remove the 18 screws, then remove the cover. Cover Replacing fuse If a fuse blows, or the transceiver stops functioning, find and repair the cause of the problem. Then replace the damaged fuse with a new, adequately rated fuse. L Spare fuses are supplied with the transceiver. The fuses are installed in the DC power cable and in the inside circuitry, to protect the transceiver. ••DC power cable fuses ATQ 25 A ••Circuitry fuse ATC 5 A RWARNING! ••Disconnect the DC power cable from the transceiver before replacing the fuse. ••NEVER use fuses that are not specified. 2. Remove the 13 shield screws, then remove the shield cover. Shield cover 3. Replace the circuitry fuse as shown below. CAUTION: When you remove a fuse, use longnose 1 pliers to protect your fingers and the fuse holders. 2 ATQ 25 A fuse 3 ATC 5 A fuse 4. Replace the removed parts. 10-1