Icom IC-9700 Instruction Manual basic - Page 88

12 OPTIONS Options HM-219 microphone The same as supplied. SM-30 desktop microphone Desktop microphone with a low frequency cut function. SM-50 desktop microphone Dynamic microphone with [UP]/[DOWN] switches. PS-126 dc power supply • Output voltage: 13.8 V DC • Maximum output current: 25 A SP-34 eXternal speaker External speaker with high and low frequency cut functions. SP-38 eXternal speaker Designed to match the IC-9700. SP-41 eXternal speaker Designed to match the IC-9700. • MB-118 mounting bracket To mount the transceiver inside a vehicle. • MB-123 carrying handle • OPC-2350LU data cable • SP-33 eXternal speaker Designed for base station operation. • SP-35 eXternal speaker Designed for mobile operation. • CT-17 ci-V conVerter For remote transceiver control using a PC equipped with an RS-232C port. • RS-BA1 Version 2 ip remote control software NOTE: To remotely control transceivers using the RS-BA1, BE SURE to comply with your local regulations. Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used with equipment that is not manufactured or approved by Icom. About the free download software You can download each manual and guide from the Icom website. http://www.icom.co.jp/world/support/ Before using, read each manual and guide, and use it according to the instructions. LTo use to the software, the following items are required. CS-9700 programming software RS-MS1A RS-MS3A (For Android™ devices) RS-MS3W (For Windows) Android™ application terminal mode/access point mode application terminal mode/access point mode software SD card USB cable OPC-2350LU LTo add or expand a function, or to improve the performance, the software version may be upgraded. Before you update your software version, see the instructions and cautions described on the Icom website. 12-1