Intel E6600 Specification Update - Page 41

Errata AI52. Last Branch Records (LBR) Updates May be Incorrect after a Task Switch Problem: A Task-State Segment (TSS) task switch may incorrectly set the LBR_FROM value to the LBR_TO value. Implication: The LBR_FROM will have the incorrect address of the Branch Instruction. Workaround: None Identified. Status: For the steppings affected, see the Summary Tables of Changes. AI53. IO_SMI Indication in SMRAM State Save Area May Be Set Incorrectly Problem: The IO_SMI bit in SMRAM's location 7FA4H is set to "1" by the CPU to indicate a System Management Interrupt (SMI) occurred as the result of executing an instruction that reads from an I/O port. Due to this erratum, the IO_SMI bit may be incorrectly set by • A non-I/O instruction. • SMI is pending while a lower priority event interrupts • A REP I/O read • An I/O read that redirects to MWAIT • In systems supporting Intel® Virtualization Technology a fault in the middle of an IO operation that causes a VM Exit Implication: SMM handlers may get false IO_SMI indication. Workaround: The SMM handler has to evaluate the saved context to determine if the SMI was triggered by an instruction that read from an I/O port. The SMM handler must not restart an I/O instruction if the platform has not been configured to generate a synchronous SMI for the recorded I/O port address. Status: For the steppings affected, see the Summary Tables of Changes. AI54. INIT Does Not Clear Global Entries in the TLB Problem: INIT may not flush a TLB entry when: • The processor is in protected mode with paging enabled and the page global enable flag is set (PGE bit of CR4 register) • G bit for the page table entry is set • TLB entry is present in TLB when INIT occurs Implication: Software may encounter unexpected page fault or incorrect address translation due to a TLB entry erroneously left in TLB after INIT. Workaround: Write to CR3, CR4 (setting bits PSE, PGE or PAE) or CR0 (setting bits PG or PE) registers before writing to memory early in BIOS code to clear all the global entries from TLB. Status: For the steppings affected, see the Summary Tables of Changes. Intel® Core™2 Extreme Processor X6800 and Intel® Core™2 Duo Desktop Processor E6000 and E4000 Sequence 41 Specification Update