Intel S2600CP S2600CP/P4000CP family Service Guide - Page 119

Hardware Installations and Upgrades Mass Storage Controller Configuration The Mass Storage Configuration screen allows the user to configure the Mass Storage controllers that are integrated into the server board on which the BIOS is executing. This includes only onboard Mass Storage controllers. Mass Storage controllers on add-in cards are not included in this screen, nor are other storage mechanisms such as USB-attached storage devices or Network Attached Storage. There are two types of onboard controller configured in this screen, the AHCI SATA controller and the Storage Control Unit (SCU) with SATA or SAS drive support and RAID support. There are also informational displays of AHCI and SCU controller configuration, and SATA Drive Information when applicable. If the presence of an Intel® Storage Module is detected, the type of Storage Module is displayed as information-only. To access this screen from the Main screen, select Advanced > Mass Storage Controller Configuration. To move to another screen, press the key to return to the Advanced screen, then select the desired screen. Figure 125. Mass Storage Controller Configuration Screen Advanced Mass Storage Controller Configuration AHCI Controller Configuration SATA/SAS Controller Configuration Staggered Spin-Up Support SATA Port 0 SATA Port 1 Enabled/Disabled Not Installed / Not Installed / Screen Field Descriptions: 1. AHCI Controller Configuration Option Values: One of these strings: Controller is disabled 2 ports of 6Gb/s SATA 2 ports of 6Gb/s SATA plus 4 ports of 3Gb/s SATA Help Text: Comments: Information only. This is a display showing which ports are available through the onboard AHCI capable SATA controller, if the controller is enabled. This information is also displayed during POST in the POST Diagnostic Screen. Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide (Preliminary) 105