Intel S2600CP S2600CP/P4000CP family Service Guide - Page 41
Installing and Removing Memory
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Hardware Installations and Upgrades Figure 33. Installing Processor Heatsink Installing and Removing Memory Installing Memory 1. Locate the DIMM sockets. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position (see letter "A"). 2. Holding the DIMM by the edges, remove it from its anti-static package. Position the DIMM above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM socket (see letter "B"). 3. Insert the bottom edge of the DIMM into the socket (see letter "C"). When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place (see letter "D"). Make sure the clips are firmly in place (see letter "E"). Figure 34. Installing Memory Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide (Preliminary) 27