Intel S2600CP S2600CP/P4000CP family Service Guide - Page 56
Installing an Additional Hot-swap Power Supply, Module, Replacing a Hot Swap Power Supply Module
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Hardware Installations and Upgrades Installing an Additional Hot-swap Power Supply Module WARNING Hazardous voltage, current, and energy levels are present inside the power supply. There are no user-serviceable parts inside it; servicing should be done by technically qualified personnel. 1. Observe the safety and ESD precautions at the beginning of this book. 2. Insert finger into finger hole in middle of filler panel and remove the filler panel from chassis. Figure 66. Removing Power Supply Filler Panel 3. Insert the power supply module into the power supply cage and push all the way until it clicks into place. Figure 67. Installing Additional Hot-swap Power Supply Module Replacing a Hot Swap Power Supply Module WARNING Hazardous voltage, current, and energy levels are present inside the power supply. There are no user-serviceable parts inside it; servicing should be done by technically qualified personnel. 1. Observe the safety and ESD precautions at the beginning of this book. 2. Remove power cable from defective power supply. 3. Press up on green latch in the direction shown while pulling on handle to remove hot swap power supply from chassis. 42 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide