Intel S2600CP S2600CP/P4000CP family Service Guide - Page 124

Hardware Installations and Upgrades Comments: Information only. If no Storage module is detected, then None is displayed. This shows the customer the product name of the module installed, which helps in identifying drivers, support, documentation, etc. Back to [Mass Storage Controller Configuration Screen] 9. SATA Port (For Port numbers 0-1) Option Values: Not Installed Help Text: Comments: Information only. The Drive Information, when present, will typically consist of the drive model identification and size for the disk drive installed on a particular port. This Drive Information line is repeated for all 2 SATA Porst for the onboard AHCI capable SATA Controller. However, for any given board, only the ports which are physically populated on the board are shown. That is, a board which only implements the two 6 GB/s ports 0 and 1 will only show those two ports in this Drive Information list. This section for Drive Information does not appear at all when the SCU is set to Disabled or the SATA operational mode is RAID Mode, nor for any drives attached to the SCU SATA or SAS ports. In these cases the BBS information is not available to display. Back to [Mass Storage Controller Configuration Screen] PCI Configuration The PCI Configuration screen allows the user to configure the PCI memory space used for onboard and add-in adapters, configure video options, and configure onboard adapter options. It also includes a selection option to go to the NIC Configuration screen. 110 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide