Intel S2600CP S2600CP/P4000CP family Service Guide - Page 73
Replacing the Backplane
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Hardware Installations and Upgrades Figure 94. Installing the Hot-swap HDD EMI Shield Replacing the Backplane Removing the Backplane 1. Remove all hot-swap drive carriers, regardless of whether or not a drive is installed in the carrier. 2. Disconnect all cables from the backplane. 3. For server system with 3.5" hard drive bay, do the following: A. Remove the screw to release the hard drive cage (see letter "A"); B. Slide the hard drive cage out of the server chass (see letter "B"); Figure 95. Removing 3.5" hard drive backplane - remove the hard drive cage C. Remove the screw as shown (see letter "A"); D. Slide the backplane (see letter "B"); E. Remove the backplane from the server chassis (see letter "C"). Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide (Preliminary) 59