Intel S2600CP S2600CP/P4000CP family Service Guide - Page 37
Removing and Installing Processor
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Hardware Installations and Upgrades Figure 25. Installing the Airduct Removing and Installing Processor The heatsink has thermal interface material (TIM) on the underside of it. Use caution so that you do not damage the thermal interface material. Use gloves to avoid sharp edges. Removing Processor Heatsink(s) The heatsink is attached to the server board/processor socket with captive fasteners. Using a #2 Phillips* screwdriver, loosen the four screws located on the heatsink corners in a diagonal manner using the following procedure: 1. Using a #2 Phillips* screwdriver, start with screw 1 and loosen it by giving it two rotations and stop (see letter "A"). (IMPORTANT: Do not fully loosen.) 2. Proceed to screw 2 and loosen it by giving it two rotations and stop (see letter "B"). Similarly, loosen screws 3 and 4. Repeat steps A and B by giving each screw two rotations each time until all screws are loosened. 3. Lift the heatsink straight up (see letter "C"). Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide (Preliminary) 23