Intel S2600CP S2600CP/P4000CP family Service Guide - Page 62
Installing and Removing the Server Board
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Hardware Installations and Upgrades 14. Insert the power supply(s) into the power supply cage and push all the way until it clicks into place. Figure 78. Installing Hot-swap Power Supply Module into Chassis 15. Reinstall the air duct. For instructions, see "Installing the Airduct". 16. Re-install the chassis cover. For instructions, see "Installing the Chassis Cover". 17. Plug all peripheral devices and the AC power cable into the server. 18. Power up the server. Installing and Removing the Server Board Removing the Server Board 1. Disconnect all cables from the server board. 2. Remove the four screws to release the air duct side wall. 3. Lift the air duct side wall to remove from the server board. 4. Remove the nine screws from the server board (see letter "A"). 5. Lift the server board from the server system (see letter "B"). 48 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide