Intel S2600CP S2600CP/P4000CP family Service Guide - Page 23
System Jumpers
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Server System Features System Jumpers The figure below shows the locations of System Jumpers on Intel® Server Board S2600CP. Jumper Name BIOS Recovery BIOS Default (a.k.a CMOS Clear) ME Force Update BMC Force Update Password Clear Pins 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 1-2 2-3 System Results Pins 1-2 should be connected for normal system operation. (Default) The main system BIOS does not boot with pins 2-3 connected. The system only boots from EFIbootable recovery media with a recovery BIOS image present. These pins should have a jumper in place for normal system operation. (Default) If pins 2-3 are connected when AC power unplugged, the CMOS settings clear in 5 seconds. Pins 2-3 should not be connected for normal system operation. ME Firmware Force Update Mode - Disabled (Default) ME Firmware Force Update Mode - Enabled BMC Firmware Force Update Mode - Disabled (Default) BMC Firmware Force Update Mode - Enabled These pins should have a jumper in place for normal system operation. (Default) To clear administrator and user passwords, power on the system with pins 2-3 connected. The administrator and user passwords clear in 5-10 seconds after power on. Pins 2-3 should not be connected for normal system operation. Figure 10. Configuration Jumpers Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide 9