Intel S2600CP S2600CP/P4000CP family Service Guide - Page 80
Removing and Installing the Front Panel Tray
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Hardware Installations and Upgrades Figure 106. Installing the Chassis Feet 7. Put chassis in the upright position. 8. Reconnect all peripheral devices and the AC power cable to the server. Power up the server. Removing and Installing the Front Panel Tray CAUTION The front panel is NOT hot swappable. Before removing or replacing the control panel, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Removing the Front Control Panel Tray 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Remove the air duct if it is installed. 6. Disconnect the front panel cable, USB cable from the server board 66 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide