Intel S2600CP S2600CP/P4000CP family Service Guide - Page 50
Removing an Optical Drive
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Hardware Installations and Upgrades Figure 54. Remove the Optical Drive filler 2. Get the two optical drive rails from chassis side (see letter "B") and affix them to both optical drive sides, make sure the pinches on the optical drive rail are aligned with the alignment holes on the ODD (see letter "C"). Insert the optical drive into chassis opening and push all the way until it stops (see letter "D"). Connect the power and data cables to optical drive. Figure 55. Installing an Optical Drive Removing an Optical Drive 1. Remove the cables from optical drive. 2. Press the latching end of optical drive rails (see letter "A") and pull the optical drive out (see letter "B"). 3. Remvoe the optical drive rail from the drive (see letter "C"). Figure 56. Remove an Optical Drive 36 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide