Intel S2600CP S2600CP/P4000CP family Service Guide - Page 130
Enable/Disable Onboard NIC<n> Port<x> LOM PXE Boot, Enable/Disable Onboard NIC iSCSI
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Hardware Installations and Upgrades 12. NIC1 Port1 PXE 13. NIC1 Port2 PXE 14. NIC1 Port3 PXE 15. NIC1 Port4 PXE 16. NIC2 Port1 PXE 17. NIC2 Port2 PXE 18. NIC2 Port3 PXE 19. NIC2 Port4 PXE Option Values: Enabled Disabled Help Text: Enable/Disable Onboard NIC Port LOM PXE Boot Comments: This will enable or disable PXE Boot capability for Port of Onboard Network Controller . The NIC Port PXE option and MAC Address display will not appear when this option is disabled. This option will not appear when NIC is disabled or when NIC Port is disabled. In order to disable the PXE Boot OPROM for NIC1 (1Gb) or NIC2 (10Gb), PXE Boot must be disabled for all ports on the corresponding NIC1 or NIC2. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] 20. Onboard NIC iSCSI Option Values: Enabled Disabled Help Text: Enable/Disable Onboard NIC iSCSI Option ROM Load. Comments: This option is grayed out and not accessible if either the NIC1 or NIC2 ROMs are enabled. There is one iSCSI Option ROM for all onboard NICs/Ports. If both of the onboard NIC are enabled and the iSCSI Option ROM is disabled, the onboard NICs cannot be booted and cannot Wake-on-LAN. This option does not appear on some models. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] 116 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide