Intel S2600CP S2600CP/P4000CP family Service Guide - Page 52
Installing and Removing the Intel, Remote Management, Module 4
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Hardware Installations and Upgrades Figure 59. Removing the Intel® RAID C600 Upgrade Key Installing and Removing the Intel® Remote Management Module 4 Installing the Intel® RMM4 Lite Locate the RMM4 Lite connector next to RISER SLOT_1, carefully pickup the Intel® RMM4 Lite module, match the alignment pin of the module and the connector on server board, then press to install. Figure 60. Installing the Intel® RMM4 Lite Install the Intel® RMM4 NIC 1. Push out and remove the metal cover on the chassis where the NIC RJ-45 receptacle will align (see letter "B"). 2. Connect the cable to the module (see letter "C"). 3. Secure the module to the cahsssi with the two screws (see letter "D"). 38 Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide