Intel S2600CP S2600CP/P4000CP family Service Guide - Page 71
Install the front bezel. For instructions, see Installing the Front Bezel Pedestal Only.
View all Intel S2600CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Hardware Installations and Upgrades Figure 91. Installing the 8x2.5" Hot-Swap Hard Drive Cage Assembly 6. Make the backplane and server board/RAID controller card cable connections. Refer to the documentation that came with your server board and/or RAID controller card for instructions on connecting backplane cables to your server board or RAID controller card. A. Connect an I2C_IN cable (letter A) B. Connect MiniSAS data cables (letter B) C. Connect power cable (letter C) Figure 92. 8x2.5" Hot Swap Backplane Cable Connections 7. Install the front bezel. For instructions, see "Installing the Front Bezel (Pedestal Only)". 8. Install the air duct if the air duct is removed. For instructions, see "Installing the Airduct" 9. Install the chassis cover. For instructions, see "Installing the Chassis Cover". 10. Plug all peripheral devices and the AC power cable into the server. 11. Power up the server. Intel® Server Board S2600CP Intel® Server System P4000CP Family Service Guide (Preliminary) 57