JVC KD-AVX44 Instructions - Page 144
Through, 120Hz, Low Power, High Power, Dolby PL, Movie, Music, High Pass Filter
UPC - 046838031953
View all JVC KD-AVX44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
ENGLISH Sound Menu items Fader/Balance Adjusts fader Adjust balance Volume Adjust Subwoofer Level*1 High Pass Filter Crossover Amplifier Gain Rear Speaker*2 Selectable settings, [reference page] Adjust fader-speaker output balance between the front and rear speakers. • Upmost-front only • Downmost-rear only When using a two-speaker system, set the fader to the center (00). Adjust balance-speaker output balance between the left and right speakers. • Leftmost-left only • Rightmost-right only Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. -12 to +12; Initial 00 • For digital sources: You can make the adjustments separately depending on the audio format-Dolby Digital/DTS and the others. Adjust the subwoofer output level. -06 to +08; Initial 00 Through: Select when the subwoofer is not connected. On: Select when the subwoofer is connected. Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz You can change the maximum volume level of this unit. Off: Deactivates the built-in amplifier. Low Power: Select this if the maximum power of the speakers is less than 50 W. High Power You can activate/deactivate the rear speakers. Off, On Disc Surround*3 Menu items Surround Off Surround On Selectable settings, [reference page] Select to deactivate the surround function. Select to activate the surround function. ☞ [26] Auto, Through, Dolby PLII Movie, Dolby PLII Music • When you select , you can adjust and .*4 60