JVC KD-AVX44 Instructions - Page 691

ENGLISH USB • If "No USB device" appears after removing a device, reattach a device or select another playback source. • When the USB device has no playable files, or has not been formatted correctly, "Cannot play this device Check the device" appears on the monitor. • The unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA. • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions. • USB devices equipped with special functions such as data security functions cannot be used with the unit. • Do not use a USB device with 2 or more partitions. • Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. • When connecting a USB device, refer also to its instructions. • Connect only one USB device to the unit at a time. Do not use a USB hub. • This unit may not recognize a USB device connected through a USB card reader. • When connecting with a USB cable, use the USB 2.0 cable. • This unit may not play back files in a USB device properly when using a USB extension cord. • This unit cannot assure proper functions or supply power to all types of the devices. • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • This unit can recognize a total of 25 characters for file/folder names. • For MPEG1/2 files: The maximum bit rate for video signals (average) is 2 Mbps. iPod operations • You can control the following types of iPods: - Through the USB 2.0 cable • iPod video (5th Generation)* • iPod nano • iPod nano (2nd Generation) - Through the interface adapter • iPod with dock connector (3rd Generation) • iPod with Click Wheel (4th Generation) • iPod mini • iPod photo • iPod nano • iPod video (5th Generation) * To watch the video, connect the iPod using USB Audio and Video cable (not supplied). • If the iPod does not play correctly, update your iPod software to the latest version. For details about updating your iPod, visit . • When you turn on this unit, the iPod is charged through the unit. • While the iPod is connected, all operations from the iPod are disable. Perform all operations from this unit. • The text information may not be displayed correctly. • The text information scrolls on the monitor. This unit can display up to 40 characters when using the interface adapter and up to 128 characters when using the USB 2.0 cable or USB Audio and Video cable. Notice: When operating an iPod, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: - For the USB connection: - For the interface adapter connection: For the USB connection: When is set to : Do not press any keys during the first 30 seconds or more of playing back any track containing artwork*. It takes 30 seconds or more to display artwork and no operations are available while loading it. * The picture displayed on the iPod's screen while playing back a track. DAB tuner • Only the primary DAB service can be preset even when you store a secondary service. 59 REFERENCES