JVC KW-Z1000W Instruction Manual America - Page 72

Speaker / X’over setup, Only for Front, Rear

Get JVC KW-Z1000W PDF manuals and user guides View all JVC KW-Z1000W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Controlling Audio NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Front focus of Listening Position / DTA --Fader for Controlling General Audio --Zone Control --Selection of the speakers to output sound from the smartphone/cell-phone of Bluetooth HF/ Audio --Beep for User Interface Setup • While talking on the paired phone or using the voice recognition function, the speaker system cannot be switched. • When the dual zone is selected and audio source other than "OFF" is selected as Rear Source, the speaker system cannot be switched to the 3-way mode. Speaker / X'over setup 1 Press the [ ]/[ ] button. 2 Touch [ ]. 3 Touch [Audio]. hhAudio screen appears. 4 Touch [Speaker / X`over]. 5 Select a car type. You can select the car type and speaker network, etc. When you select your car type, the Delay Time Alignment is activated automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 6 Touch the speaker (1) you wish to adjust and set each parameter (2) as follows. 2 1 2 ■■ [Speaker] You can select a speaker type and its size to get the best sound effects. When the speaker type and size are selected, the speaker crossover network is set automatically. ■■[Location] (Only for Front, Rear) Select the speaker position you have installed. ■■[Tweeter] (Only for Front) You can set up the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■[HPF FREQ] (Only for Front, Rear) High Pass Filter adjustment. ■■[LPF FREQ] (Only for Subwoofer) Low Pass Filter adjustment. ■■ [Slope] Set a crossover slope. ■■ [Gain] Adjust the gain of the front speaker, rear speaker, or subwoofer. ■■[TW Gain] (Only for Front) Adjust the tweeter level. ■■[Phase Inversion] (Only for Subwoofer) Set the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Controlling Audio
72
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
–
Front focus of Listening Position / DTA
–
Fader for Controlling General Audio
–
Zone Control
–
Selection of the speakers to output sound from
the smartphone/cell-phone of Bluetooth HF/
Audio
–
Beep for User Interface Setup
• While talking on the paired phone or using the
voice recognition function, the speaker system
cannot be switched.
• When the dual zone is selected and audio source
other than "OFF" is selected as Rear Source, the
speaker system cannot be switched to the 3-way
mode.
Speaker / X’over setup
1
Press the
[
]
/
[
]
button.
2
Touch
[
]
.
3
Touch
[
Audio
]
.
h
Audio screen appears.
4
Touch
[
Speaker / X
’
over
]
.
5
Select a car type.
You can select the car type and speaker
network, etc.
When you select your car type, the Delay
Time Alignment is activated automatically
(for timing adjustment of sound output for
each channel) to have the highest surround
effects.
6
Touch the speaker (
1
) you wish to adjust
and set each parameter (
2
) as follows.
2
2
1
■
[
Speaker
]
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are selected,
the speaker crossover network is set
automatically.
■
[
Location
]
(Only for Front, Rear)
Select the speaker position you have
installed.
■
[
Tweeter
]
(Only for Front)
You can set up the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
■
[
HPF FREQ
]
(Only for Front, Rear)
High Pass Filter adjustment.
■
[
LPF FREQ
]
(Only for Subwoofer)
Low Pass Filter adjustment.
■
[
Slope
]
Set a crossover slope.
■
[
Gain
]
Adjust the gain of the front speaker, rear
speaker, or subwoofer.
■
[
TW Gain
]
(Only for Front)
Adjust the tweeter level.
■
[
Phase Inversion
]
(Only for Subwoofer)
Set the phase of subwoofer output.
Check
[
Phase Inversion
]
to shift the phase
180 degrees.