JVC KW-Z1000W Instruction Manual America - Page 87

Installation procedure, Connection/Installation, Distance between

Get JVC KW-Z1000W PDF manuals and user guides View all JVC KW-Z1000W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

= x1 ~ (Ø3 x 6 mm) (Black) x2 ! x1 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Remove the vehicle parts for installing the unit and connecting wires to terminal. 3) Make the proper input and output wire connections for each unit. 4) Connect the speaker wires of the wiring harness. 5) Connect the wiring harness wires in the following order; ground, battery, ignition. 6) Determine the height of the display unit and position of the slider. See Distance between the display unit and the main unit (P.88). 7) Connect the wiring harness connector to the unit. 8) Install the main unit to the vehicle. 9) Reinstall the vehicle parts. 10) Install the display unit. 11) Reconnect the ¤ terminal of the battery. 12) Perform the Initial Setup. See Initial SETUP (P.6). Connection/Installation English 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Connection/Installation
87
English
=
x1
~
(Ø3 x 6 mm)
(Black)
x2
!
x1
Ñ
Installation procedure
1) To prevent a short circuit, remove the key
from the ignition and disconnect the
¤
terminal of the battery.
2) Remove the vehicle parts for installing the
unit and connecting wires to terminal.
3) Make the proper input and output wire
connections for each unit.
4) Connect the speaker wires of the wiring
harness.
5) Connect the wiring harness wires in the
following order; ground, battery, ignition.
6) Determine the height of the display unit and
position of the slider. See
Distance between
the display unit and the main unit (P.88)
.
7) Connect the wiring harness connector to the
unit.
8) Install the main unit to the vehicle.
9) Reinstall the vehicle parts.
10) Install the display unit.
11) Reconnect the
¤
terminal of the battery.
12) Perform the Initial Setup.
See
Initial SETUP (P.6)
.