JVC KW-Z1000W Instruction Manual America - Page 91

Microphone unit, Installing the main unit, Reinstall the removed parts such as

Get JVC KW-Z1000W PDF manuals and user guides View all JVC KW-Z1000W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

ÑÑMicrophone unit 1) Check the installation position of the microphone (accessory 3). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 3), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 3) to the driver. 3 Connection/Installation 4 Install the main unit to the vehicle. 5 Reinstall the removed parts such as a panel on the vehicle. Panel on the vehicle Main unit 6 Install the display unit (accessory 8) to the main unit. Main unit Fix a cable with a commercial item of tape. ÑÑInstalling the main unit NOTE • Determine the slider position before installing the main unit. (P.89) The slider position cannot be changed after installing to the vehicle. • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). 1 Remove parts that interfere with installing such as a panel on the vehicle. 2 Install the car bracket to the main unit. 8 NOTE • If the display unit hits a panel on the vehicle, adjust the display height by referring to Adjusting the display height (P.90). 7 Fix the display unit with six hexagon head screws (accessory -). - Car bracket Main unit 4 or 5 3 Connect the wiring harness wires and peripheral equipment. English 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Connection/Installation
91
English
Ñ
Microphone unit
1) Check the installation position of the
microphone (accessory
3
).
2) Clean the installation surface.
3) Remove the separator of the microphone
(accessory
3
), and stick the microphone to
the place shown below.
4) Wire the microphone cable up to the unit
with it secured at several positions using tape
or other desired method.
5) Adjust the direction of the microphone
(accessory
3
) to the driver.
3
Fix a cable with a commercial item of tape.
Ñ
Installing the main unit
NOTE
• Determine the slider position before installing the
main unit.
(P.89)
The slider position cannot be
changed after installing to the vehicle.
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
1
Remove parts that interfere with
installing such as a panel on the vehicle.
2
Install the car bracket to the main unit.
Car bracket
4
or
5
Main unit
3
Connect the wiring harness wires and
peripheral equipment.
4
Install the main unit to the vehicle.
5
Reinstall the removed parts such as a
panel on the vehicle.
Panel on the
vehicle
Main unit
6
Install the display unit (accessory
8
) to
the main unit.
Main unit
8
NOTE
• If the display unit hits a panel on the vehicle,
adjust the display height by referring to
Adjusting the display height (P.90)
.
7
Fix the display unit with six hexagon head
screws (accessory
-
).
-