JVC KW-Z1000W Instruction Manual America - Page 89

Positioning the slider in, forward, the main unit.

Get JVC KW-Z1000W PDF manuals and user guides View all JVC KW-Z1000W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

ÑÑPositioning the slider in forward 1 Remove the four screws from the bottom of the main unit. Screw Connection/Installation 4 Install the bracket for forward position (accessory 0) each side so that its projections are aligned with the slots on the main unit. 0 Projection Projection Main unit 2 Remove the two cover for back position, and then remove the two hexagon head screws from the bracket for back position. Bracket for back position Hexagon head screw 5 Fix the bracket for forward position to the slider block with the two hexagon head screws. Push the slider block until it stops and then fix the bracket for forward position to the main unit with the two hexagon head screws. Hexagon head screw Cover for back position 3 Pull the slider block forward and remove the two hexagon head screws to remove the bracket for back position. Hexagon head screw Bracket for back position Hexagon head screw 6 Reinstall the four screws to the bottom of the main unit. Screw 7 Install the cover for forward position (accessory 9) to two locations, as shown. 9 English 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Connection/Installation
89
English
Ñ
Positioning the slider in
forward
1
Remove the four screws from the bottom
of the main unit.
Main unit
Screw
2
Remove the two cover for back position,
and then remove the two hexagon head
screws from the bracket for back position.
Hexagon head
screw
Bracket for back
position
Cover for back
position
3
Pull the slider block forward and remove
the two hexagon head screws to remove
the bracket for back position.
Bracket for back
position
Hexagon head
screw
4
Install the bracket for forward position
(accessory
0
) each side so that its
projections are aligned with the slots on
the main unit.
Projection
Projection
0
5
Fix the bracket for forward position to
the slider block with the two hexagon
head screws. Push the slider block until it
stops and then fix the bracket for forward
position to the main unit with the two
hexagon head screws.
Hexagon
head screw
Hexagon head
screw
6
Reinstall the four screws to the bottom of
the main unit.
Screw
7
Install the cover for forward position
(accessory
9
) to two locations, as shown.
9