Lenovo ThinkPad 380ED English - Windows 2000 Professional Setup Guide - Page 45

Hot and Warm swapping support for ACPI-supported ThinkPad models

Page 45 highlights

Hot and Warm swapping support for ACPI-supported ThinkPad models One of the advantages that an ACPI-based portable computer offers while running Windows 2000 is full Plug-and-Play support for devices located in the UltraBay II or UltraslimBay slot of your ThinkPad computer. Such devices include the following: o IDE hard drive o LS-120 Super Disk drive o ZIP 100 drive o IDE CD-ROM and DVD -ROM drive o Secondary battery pack o Diskette drive Each device can be dynamically inserted and removed from the swappable bay slot without having to completely turn off the computer. The type of Plug-and-Play support and functionality for the swappable bay is very similar to PC Card, CardBus, and USB devices being inserted into their respectable slots. Depending on your type of ACPI-supported ThinkPad computer, Windows 2000 supports two types of swapping: Hot and Warm. Warm swapping: Under Windows 2000, you can perform warm swap after the computer is placed into Standby mode. Just before the system enters Standby mode, Windows 2000 will properly "stop" the device in the swappable bay slot. After the computer enters Standby, the user can safely remove the device from the computer . In order for warm swapping to function properly under Windows 2000, this operation must be initiated using the "Unplug or eject hardware" icon in the desktop Taskbar. Hot swapping: Under Windows 2000, you can perform a hot swap while the computer is "running". You can remove or insert an device from the swappable bay without turning off or placing the computer into Standby. The user can safely swap in and out different devices from the swappable bay slot by clicking the "Unplug or Eject Hardware" icon in the desktop Taskbar or pressing the eject request button. Note: The above swapping capability is only supported on ACPI ThinkPad models. On APM models, only cold swappingis supported. Although Windows 2000 and your ThinkPad computer BIOS support these features, some applications, such as anti-virus software, do not always support IDE storage-device swapping. If such an application has access to these devices, the application software will permit or prohibit removing a device when the user requests device ejection. Please consult with your application vendor for information your application and storage-device swapping. The following table lists the UltraBay II and UltraslimBay swapping capabilities and support under Windows 2000: ThinkPad 770E, 770X, 770Z ThinkPad 600, 600E, 600X ThinkPad 570, 570E ThinkPad 390, 390E, 390X Secondary hard disk Secondary Battery Hot and warmswap ping Hot -swapping Warm-swapping only Warm-swapping Hot-undocking and swapping Hot - Warmswap ping Warm-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

Hot and Warm swapping support for ACPI-supported ThinkPad models
One of the advantages that an ACPI-based portable computer offers while running Windows
2000 is full Plug-and-Play support for devices located in the UltraBay II or UltraslimBay slot
of your ThinkPad computer.
Such devices include the following:
o
IDE hard drive
o
LS -120 Super Disk drive
o
ZIP 100 drive
o
IDE CD-ROM and DVD-ROM drive
o
Secondary battery pack
o
Diskette drive
Each device can be dynamically inserted and removed from the swappable bay slot without
having to completely turn off the computer.
The type of Plug-and-Play support and
functionality for the swappable bay is very similar to PC Card, CardBus, and USB devices
being inserted into their respectable slots.
Depending on your type of ACPI-supported
ThinkPad computer, Windows 2000 supports two types of swapping: Hot and Warm.
Warm swapping:
Under Windows 2000, you can perform warm swap after the computer is placed into
Standby mode.
Just before the system enters Standby mode, Windows 2000 will
properly “stop” the device in the swappable bay slot.
After the computer enters
Standby, the user can safely remove the device from the computer .
In order for warm
swapping to function properly under Windows 2000, this operation
must
be initiated
using the
“Unplug or eject hardware”
icon in the desktop Taskbar.
Hot swapping:
Under Windows 2000, you can perform a hot swap while the computer is “running”.
You can remove or insert an device from the swappable bay without turning off or
placing the computer into Standby.
The user can safely swap in and out different
devices from the swappable bay slot by clicking the “Unplug or Eject Hardware” icon
in the desktop Taskbar or pressing the eject request button.
Note:
The above swapping capability is only supported on ACPI ThinkPad models. On APM
models, only cold swapping is supported.
Although Windows 2000 and your ThinkPad computer BIOS support these features, some
applications, such as anti-virus software, do not always support IDE storage-device swapping.
If such an application has access to these devices, the application software will permit or
prohibit removing a device when the user requests device ejection.
Please consult with your
application vendor for information your application and storage-device swapping.
The following table lists the UltraBay II and UltraslimBay swapping capabilities and support
under Windows 2000:
ThinkPad 770E,
770X, 770Z
ThinkPad 600,
600E, 600X
ThinkPad
570, 570E
ThinkPad 390,
390E, 390X
Secondary hard disk
Hot and warm-
swap ping
Warm-swapping
only
Hot-undocking
and swapping
Warm-
swap ping
Secondary Battery
Hot -swapping
Warm-swapping
Hot-
Warm-