Lenovo ThinkPad Edge E135 (English) User Guide - Page 105

Menu item, Selection, Comments, Enabled, hours, Disabled, Beep and Alarm, Serial ATA SATA

Page 105 highlights

Table 4. Config menu items (continued) Menu item Submenu item Intel (R) Rapid Start Technology Beep and Alarm Password Beep Selection • Disabled • Enabled Enter after: • Immediately • 1 minute • 2 minutes • 5 minutes • 10 minutes • 15 minutes • 30 minutes • 1 hour • 2 hours • 3 hours • Disabled • Enabled Serial ATA (SATA) CPU Keyboard Beep SATA Controller Mode Option • Disabled • Enabled • Compatibility • AHCI Core Multi-Processing • Disabled • Enabled Intel Hyper-Threading Technology • Disabled • Enabled Comments Enable or disable Intel Rapid Start Technology. When enabled, you can enable the 30 Day Standby function through the Power Manager program. The function enables the computer to enter a lower power state after the specified time in sleep state. And it takes only seconds to resume normal operation. Note: To use this feature, a special partition on the solid state drive is required. Enable this option to have a beep sound when the system is waiting for a power-on, hard disk, or supervisor password. Different beeps will sound when the entered password matches or does not match the configured password. Enables or disables keyboard beep when unmanageable key combinations are pressed. Selects SATA controller operation mode. If you select Compatibility mode, SATA controller operates in compatibility mode. Enable or disable additional execution core units within a CPU. Note: If you are using a computer with a single-core processor, this item does not appear. Enable or disable additional logical processors within a processor core. Note: This sub-menu is not supported in models with an AMD CPU. Chapter 7. Advanced configuration 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158

Table 4. Config menu items (continued)
Menu item
Submenu item
Selection
Comments
Intel (R) Rapid Start
Technology
Disabled
Enabled
Enter after:
Immediately
1 minute
2 minutes
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
2 hours
3 hours
Enable or disable Intel
Rapid Start Technology.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program. The
function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Note:
To use this feature,
a special partition on the
solid state drive is required.
Password Beep
Disabled
Enabled
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Beep and Alarm
Keyboard Beep
Disabled
Enabled
Enables or disables
keyboard beep when
unmanageable key
combinations are pressed.
Serial ATA (SATA)
SATA Controller Mode
Option
Compatibility
AHCI
Selects SATA controller
operation mode. If you
select
Compatibility mode
,
SATA controller operates in
compatibility mode.
Core Multi-Processing
Disabled
Enabled
Enable or disable additional
execution core units within
a CPU.
Note:
If you are using a
computer with a single-core
processor, this item does
not appear.
CPU
Intel Hyper-Threading
Technology
Disabled
Enabled
Enable or disable additional
logical processors within a
processor core.
Note:
This sub-menu is not
supported in models with
an AMD CPU.
Chapter 7
.
Advanced configuration
89